AEG KO-LAVAMAT 88840 User Information page 36

Operating Instructions
Problem
Remnants of detergent
are building up in the
detergent drawer.
The rinse water is
cloudy.
When pressing a pro-
gramme option but-
ton, the corresponding
display does not light
up.
Only END is illuminated
on the control panel.
Only WASH TIME is lit
on the panel and the
WASH TIME display
shows a number be-
tween 1 and 19.
The Programme
Progress Display is
flashing continuously.
36
Possible Cause
The water tap is not fully
opened.
The inlet hose filter in the
coupling of the inlet hose at
the tap is blocked.
The cause is probably a de-
tergent with a high silicate
content.
The selected programme op-
tion cannot be combined
with the set programme.
The washing machine is in
Stand-by mode.
Delay Start Timer is running,
and the washing machine is
in Stand-by mode.
Programme Protection is
switched on; the programme
selector has been moved
during the washing cycle.
Remedy
Turn the water tap on fully.
Close the water tap. Unscrew
the inlet hose from the water
tap and from the machine.
Clean the filter.
This has no negative effects
on rinse results; use a liquid
detergent, if necessary.
Make another selection.
Press any of the buttons.
Press any of the buttons to
cancel Stand-by mode.
Turn the programme selec-
tor back to the original posi-
tion (see "Programme
Protection").