Setting The Delay Timer; Starting The Wash Programme; Wash Programme Progress - AEG LAVAMAT 50550 ELECTRONIC User Information

Setting the delay timer

The DELAY TIMER (DEPART DIFFERE/STARTTIJDKEUZE) button allows you
to delay the start of a wash programme.
0 Press the button DELAY TIMER (DEPART DIF-
FERE/STARTTIJDKEUZE) once if you would like
the wash programme to start in six hours. The
6h display will illuminate.
0 Press the button DELAY TIMER (DEPART DIF-
FERE/STARTTIJDKEUZE) twice if you would like
the wash programme to start in three hours.
The 3h display will illuminate.
Press the button DELAY TIMER (DEPART DIFFERE/STARTTIJDKEUZE) once
more if you would like to cancel the delay timer. The display will go out.
The delay timer that you have set is only activated when the wash pro-
3
gramme is started by pressing the START/PAUSE (MARCHE/PAUSE,
START/PAUZE) button.
Note: If the delay timer has been set for six hours, the 6h display will
illuminate. After a period of 3 hours this display will change and the 3h
display will illuminate. The wash programme will start after a total of
6 hours.

Starting the Wash Programme

1. Check that the stopcock is open.
0
2. Starting the wash programme: Press the START/
PAUSE (MARCHE/PAUSE, START/PAUZE) button.
The wash programme starts.
If the END (FIN/EINDE) light flashes 4 times when the START/PAUSE
3
(MARCHE/PAUSE, START/PAUZE) button is pressed, the door is not
closed properly. If this happens, push the door firmly closed and press
the START/PAUSE (MARCHE/PAUSE, START/PAUZE) button again.

Wash Programme Progress

Programme Progress Display
Before the programme starts, the steps to be carried
out are indicated on the Programme Progress Display.
During the wash programme, this indicates the cur-
rent stage of the programme.
Instructions for use
23