Setting The Delay Timer/Soaking Time - AEG KO-LAVAMAT 88840 User Information

Operating Instructions

Setting the Delay Timer/Soaking time

Delay Timer
The DELAY TIMER button lets you delay the start of a wash programme
for up to 19 hours.
0 1. Select a wash programme.
2. Press the DELAY TIMER button.
3. Press the START/PAUSE button.
When a time delay has been set,
DELAY TIMER lights up.
Press the DELAY TIMER button repeat-
edly until the Multi-display shows the desired time delay, for exam-
ple,12h indicates a delay of 12 hours before the programme starts. If
the display shows19h and you press the button again, the time delay is
cancelled. The running time of the selected wash programme is shown
(in minutes, for example120). The time delay set can also be cancelled
by turning the programme selector to the OFF position.
Soaking time
If you have pressed the PRE-WASH button, you can use the DELAY
TIMER button to extend the soaking time by up to 19 hours.
0 1. Press the PRE-WASH button.
2. Press the DELAY TIMER button.
Soaking time is set, WASH TIME lights up.
The soaking time is now about 1 hour.
3. Soaking time can be extended (in hours) by repeatedly pressing the DE-
LAY TIMER button again .
WASH TIME and DELAY TIMER are lit up.
22