Changing The Spin Speed/Selecting The Rinse Hold Function; Setting The Delay Timer/Soaking Time - AEG OKO-LAVAMAT 76669 update User Information

Operating Instructions
Changing the spin speed/Selecting the rinse
hold function
If required, change the spin speed for the final
spin/select rinse hold:
Changing the spin speed
Continue pressing the spin speed/RINSE HOLD but-
0
ton until the indicator for the desired spin speed is
illuminated.
If you do not change the spin speed, the final spin
3
will be adjusted automatically depending on the
type of wash cycle:
– COTTONS/LINEN
– EASY-CARES/EASY IRON
– DELICATES
– WOOL/SILK/P (hand wash)
The speed for the intermediate spin cycle is dependent on the wash cy-
cle selected and cannot be altered.
Selecting the rinse hold function
0 Continue pressing the spin speed/RINSE HOLD button until the RINSE
HOLD indicator is illuminated.
If RINSE HOLD is selected, the washing will remain in the final rinse wa-
3
ter and will not be spun.

Setting the delay timer/soaking time

Delay timer
The DELAY TIMER button allows you to delay the start of a wash
programme by 1 to a maximum of 19 hours.
0 To do this, continue pressing the DELAY
TIMER button until the desired start delay
is displayed in the multi-display, like 12h
for a delay of the start of the programme
by 12 hours.
If 19h is shown and you press the button
once again, the duration of the wash programme set will be shown
(display in minutes, e. g.120). In this situation no time delay has been
set.
20
1600 revolutions per minute
1200 revolutions per minute
1200 revolutions per minute
1200 revolutions per minute