Johnson Controls MS-FIT100-0 User Manual page 36

Table 9: FIT Display Table
Menu Fit Display Short Meaning
ScanBus Scan Devs
ScanBus Adr
Scanbus BitVolts
ScanBus EOL
FC EOL
ScanBus Model
ScanBus Ver
ScanBus Name
ScanBus OID
ScanBus Vendor
ScanBus Desc
Issues Issues
Issues Issues
Issues Online
Issues n Issue
Type
Issues TKN
34
Expert
Mode
Quantity of
Addresses
Found
Bit Volts
Reading at
Address
Bit Volts
Reading at
Address
FC Bus: EOL
Switch Position
at Address
SA Bus: FC
Address and
EOL Switch
Position
Model Name at
Address
Firmware X
Version at
Address
Device Name at
Address
Device Object ID X
Device Vendor X
at Address
Device X
Description at
Address
Bus Issues
Menu Item
Quantity of
Issues recorded
Device Came
Online
Historical Issue
number and
Type
Token
Description
Displays the quantity of nodes talking on a
bus.
Address reported by the controller.
Communication Voltage reported by the
Address.
When connected to a FC Bus this shows the
Position of the End-Of-Line Switch reported at
address.
When connected to a SA Bus this shows the
FC Bus Address and the Position of the End-
Of-Line Switch reported at address.
Device object Model Name property for
device at address
The version of the Firmware loaded in the
controller at this address.
Device object Object_Name property for
device at address
The BACnet device ID for the scanned
controller. This is set by the application file in
the controller and are not necessarily unique.
Device object Vendor property for device at
address
Device object Description property for device
at address
Main Menu item. Select to see quantity,
history, and history details of Issues.
Quantity of potential Issues discovered by the
FIT.
Most current Issue (no leading number). In
this case, a controller came on line after initial
FIT token loop was complete.
Where n represents a historical issue, Issue
Type is either Online, Offline, Badframe,
ChrFrame, 2ndTkn or EOL>2
Represents the Token (TKN) passing from one
address to the next.
MS-FIT100-0 Field Inspection Tool User Guide