Simplex TrueCom 5140-9243 Quick Start Manual page 2

Building Communications Systems
Specifications
USOC
Ringer Equivalence
Autodial Capacity
Call Initiation
Call Termination
Programming
Signaling
Rack Mounting
Operating Temperature
Control Console with Graphic I/O:
Microphone/Speaker Option
To initiate a call using a custom graphic and the optional
external microphone/monitor speaker option, the user
would simply press the SELECT key and then the icon
key representing the station to be called. If the system is
programmed in the handsfree mode the user could
immediately begin speaking into the microphone. If not
programmed for handsfree the user would press the "Push
to Talk" key before speaking and release the key to listen.
Replies to the user would be heard through the monitor
speaker. The user can adjust the monitor level of the
speaker by pressing the monitor volume key UP or
DOWN. After the conversation is completed the user
simply pushes the reset button to end the call. The
volume level of the monitor speaker is automatically
restored to a predetermined level when the user
disconnects from the call.
In normal operation an incoming call will cause an audible
ring signal to sound and an icon LED to begin flashing on
the graphic panel. To answer the call the user simply
presses the SELECT key on the graphic. When multiple
icon LEDs are flashing indicating several calls, the user
simply presses the SELECT as stated above to answer the
first call. When the conversation has been completed, the
operator presses the next station icon to be answered.
This operation is continued until all calls have been
answered. When the last call has been addressed, the user
simply pushes the RESET button to return the system to
normal.
RJ11
0.4B
Twelve 18 Digit Numbers
Push-Activated
Push-Activated
Remote DTMF
DTMF
5 Units 8.75 inches
4°F to +140°F (-20° C to +60
° C)
firealarmresources.com
Headset Option
Making and receiving calls would be performed in the
same way as with the microphone and speaker option.
Replies from the station would be heard through the
headset with boom microphone as the transmitter.
Handset Option
To answer an incoming call the operator simply removes
the handset from the cradle. If several calls at the same
time are queued, pressing the next station icon to be
answered will pick up the next call. After answering all
calls the user simply hangs up the handset.
Paging
Zone paging is accomplished by pressing the SELECT
key, then press the desired page key and speak into the
microphone or into the headset microphone. By pressing
the ALL CALL key the user has the ability to page all
zones simultaneously.
Console
Override
Phone Jack
Optional Equipment
Gooseneck Microphone
Monitor Speaker
Handset
2
A
R
5140-9243
5100-9103
5120-9410
5140-9242