Casio CW-E60 User Manual page 26

Symptom
The printing is
not positioned
correctly on the
disc.
The disc stops
part way
through
printing.
Printing will not
start.
I can't remove
a disc from the
printer.
Possible Cause
Improper alignment of
the disc when it is placed
in the printer.
The power cord plug or
the AC adaptor is not
plugged in as far as it will
go.
The printer is malfunc-
tioning.
The disc is not positioned
correctly in the printer.
The printer is
malfunctioning.
Recommended Action
Use the positioning guide when
aligning the disc. (See the DISC
TITLE PRINTER Application
User's Guide)
Correctly connect the power
cord and the AC adaptor.
If you cannot easily remove the
disc from between the print
head and roller, refer to the
"General Guide" explanation on
page 17.
Remove the disc and then re-
insert it straight into the left side
of the slit along the top of the
printer. (See the DISC TITLE
PRINTER Application User's
Guide)
Refer to the "General Guide"
explanation on page 17.
– 26 –