Sharp HT-X1 Operation Manual page 53

In the stop mode, you can change the amplifier settings on the
TV screen.
1
Press the SET UP AMP but-
ton.
The amplifier setting screen
appears.
2
Press the or button to select the menu and press the
ENTER button.
3
Press the , , or button
to change the setting.
Repeat the operation as instructed.
(The number of repetition depends on the setting item.)
To change other settings, begin from step 2.
4
Press the RETURN button twice.
The setting is complete.
Notes:
! You cannot change the amplifier settings unless the input source
is set to DVD/CD.
! The amplifier settings cannot be changed in the tuner mode and
do not affect the tuner sound.
" Speaker delay setting
When some of the speakers are at a different distance from the lis-
tening point, you can select the speaker delay to make it seem as
though the speaker distances are the same.
Amplifier Setup
1
Press the SET UP AMP button.
Speaker Delay
Speaker Level
2
Within 10 seconds, press the
Test Tone
and then press the ENTER button.
Select Enter Return
ENTER
3
Within 10 seconds, press the
Speaker Delay
speaker.
Front L 6 FT
The indicator of the selected speaker
Center 6 FT
flashes.
Front R 6 FT
Surround R 6 FT
Surround L 6 FT
4
Within 10 seconds, press the
Select Change Return
! You can change the distance in 1
! To set the distance of other speak-
5
Press the RETURN
The setting is complete.
Note:
The speaker delay setting is not available when the surround is
"STEREO" or "VIRTUAL (SURROUND)".
or
button to select "SP DELAY",
or
button to select the desired
or
button to select the distance.
foot (0.3 m) steps.
ers, repeat the operation from step
3.
button twice.
HT-X1
Amplifier Setup
Speaker Delay
Speaker Level
Test Tone
Select ENTER Enter Return
Speaker Delay
Front L 6 FT
Center 6 FT
Front R 6 FT
Surround R 6 FT
Surround L 6 FT
Select Change Return
Speaker Delay
Front L 6 FT
Center 6 FT
Front R 6 FT
Surround R 10 FT
Surround L 6 FT
Select Change Return
53