Table of Contents
Advertisement
Q5. How to configure and access the Internet via Dynamic IP?
In Setup Wizard of the Web utility interface, select "Dynamic IP" connection type and
click "Save" to activate it. As some ISPs bind the user computer's MAC address, you need
to clone ZSR4174WE's WAN MAC address to the binding PC's MAC address. Select "MAC
Address Clone" in "Advanced Setting" to input your computer's MAC address and click
"Apply" to activate it.
Q6. How to share my computer's source with other users in Internet?
If you want Internet users to access the internal server via ZSR4174WE such as e-mail
server, Web, FTP, you can configure the "Virtual Server" to come true.
Step 1: create your internal server, make sure the LAN users can access these servers
and know related service port. For example, Web server's port is 80; FTP is 21;
SMTP is 25 and POP3 is 110.
Step 2: In the Router's web click "Virtual Server" and select "Single Port Forwarding".
Step 3: Input the external service port given by the Router, for example, 80.
Step 4: Input the internal Web service port, for example, 80.
Step 4: Input the internal server's IP address. If your Web server's IP address is
192.168.2.10, please input it.
Step 6: Select the communication protocol used by your internal host: TCP, UDP, ICMP.
Step 7: click "Apply" to activate the settings.
Q7. Why can't I use wireless WAN function to access the Internet?
Step 1: Make sure that the wireless adapter can access the Internet when connected to
the computer, wireless signals scanned by the adapter are strong enough, and
quality of signals is good enough. If it can scan too many wireless signals, we
recommend you to use 11b/g mode for reducing interference.
Step 2: Make sure that the needed parameters such as SSID, MAC address etc. are
correct. It is recommended to use Auto Scan to finish the settings in the setup
process.
Step 3: Make sure that IP address range obtained at WAN port are different as the one
obtained at LAN port. If they are at the same range, you can modify the LAN IP
address to solve the problem.
Q8. How to connect Xbox360 and PlayStation to ZSR4174WE?
You must obtain a Static IP address from your ISP. Follow the instruction in the CD ROM
filename Xbox360.pdf and setup your game console properly. After you have
successfully configured your game console, you have to open ports from the
ZSR4174WE to allow two way communications. For more information on port
forwarding instruction, please refer this user manual to 7.5 Virtual Server.
All manuals and user guides at all-guides.com
77
Advertisement
Table of Contents
