Advertisement
User Manual
English
Input Page
The input page allows for management of the input connections and the EDID settings.
Inputs: Input connection of the matrix.
Active: Indicates if the channel is connected to a source signal.
Name: The input channels name. This can be edited. Please note the max character length is 12.
EDID: Set current input channels EDID:
Set User EDID – Select the Browse button and select the bin file. If the wrong file is selected there will be
a prompt.
Please ensure the correct file is selected, then ensure the name of the file is correct. Select User 1 or User
2 and select Upload. Once successful a prompt will show.
To download the EDID file for the corresponding input channel, select from the Select EDID file drop down
list. Select Download to download the corresponding EDID file.
Output Page
The Output Page allows for management of both the HDM and Cat outputs including setting output
resolutions.
Outputs: Output channel of the matrix.
Name: The output channel's name. This can be edited. Please note the max character length is 12.
Type: The output channel connection type.
Cable: This indicates the current connection status of the output port. When a connection is made between
the output port and a display, the indicator will be green. If not, this will remain grey.
Scaler Mode: Set the output resolution.
Stream: Turn the video output on or off.
Advertisement
