Advertisement
User Manual
English
CEC Page
This page allows for management of the CEC function.
Input Control: This allows for CEC functions that can be sent to the corresponding input device. Please
note the connected device must support CEC functionality.
Output Control: This allows for CEC functions that can be sent to the corresponding HDMI output device.
Please note the connected device must support CEC functionality.
Network Page
This page provides an overview and allows for management of the network settings.
Select Set Network Defaults. This will open a prompt.
Select OK to search for the IP address again.
Once the search has finished, the Login page will open again, and the default network setting is finalised.
Modify User Password:
Select User and enter the old password, new password, confirm password and then select Save. Once
the change has been confirmed a prompt will show.
Please note the password field cannot remain empty, remain the same as the old password and the new
password and confirm password must be identical.
Modify Network Setting:
Modify the Mode, IP Address, Gateway, Subnet Mask and Telnet Port and select Save to save the settings
which take effect immediately. After any change are made, if the Mode is "Static", it will switch to the
corresponding IP address. If the Mode is set to DHCP, it will automatically search and switch to the IP
address assigned by the connected router.
Advertisement
