Sharp UX-P200 Operation Manual page 55

Transaction Report print condition
You can change the condition under which a Transaction Report is printed out.
Follow the steps below.
1
FUNCTION
Press
2
Press once and
3
Press once.
4
Press a number from
ALWAYS PRINT
1
ERROR/MEMORY
2
3
SEND ONLY
ERROR ONLY
4
NEVER PRINT
5
STOP
5
Press
once and once.
once.
to
1 5
A report will be printed after each
transmission, reception, or error.
A report will be printed after an error or a
memory operation.
A report will be printed after each
transmission.
A report will be printed only when an error
occurs.
A report will never be printed.
The display briefly shows
your selection, then:
to return to the date and time display.
Display:
OPTION SETTING
TRANSACTION
1:ALWAYS PRINT
(Selections appear alternately)
to select the condition for printing.
DIAL MODE
Printing Lists
53