Optional Reception Settings - Sharp UX-P200 Operation Manual

2
If you hear a soft fax tone, wait until your fax responds (you will hear
pronounced, high-pitched tones), then hang up.
3
If the fax doesn't respond, or if the other party first talks to you and then
wants to send a fax, set the phone done (do not hang up), walk over to
the fax, lift the fax's handset, and press
•
The above step is necessary if you have set the Fax Signal Receive setting
to NO.

Optional Reception Settings

Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone after
answering a call on your fax or an extension phone. If you use a computer fax
modem to send documents on the same line, you must turn this function off in
order to prevent your fax from mistakenly attempting to receive documents
from the computer fax modem. Follow the steps below to change the setting.
1
FUNCTION
Press
2
Press once and
3
Press once.
Beep
Pronounced, high-
pitched tones
once and once.
4 times
Optional Reception Settings
START/MEMORY
.
Display:
OPTION SETTING
.
FAX SIGNAL RX
1=YES, 2=NO
39