Check Before Reporting The Trouble - LG VH920 Series Manual

Check before reporting the trouble

Please check before notifying malfunction
Inhaling gets
weakened and
vibrating sound is
heard
Cleaner does not
work at all
Cleaner stops
suddenly
It only vibrates, but
no inhaling
Vacuum cleaner
station does not
work
Possible Cause
①The inlet or dust bin is
blocked by a big foreign
object
②The filters are dirty.
①The power cord plug is
not plugged in the socket
properly.
②Wrong operation
procedure of each function
③Socket no power
①This product has inlet
motor overheat prevention
device, and it may stop
temporarily when the
following cases occur.
– If it is used when dust
and wastes are full in dust
bin and filters.
– If it is used with the inlet
blocked
– If the product is used
excessively for a long time.
② When touch switch was
operated by other touches.
③This product has long-time
running prevention device,
and it may stop temporarily
when the vacuum cleaner
has been running for about
90 minutes.
①Same to Malfunction
3,the suddenly power
stop cause no inhaling
②Filter or dust bin is
badly clogged
③Inlet is badly clogged
①The power cord plug
is not plugged in the
socket properly.
②The main body is not
placed on the station
properly.
③UV lamp does not
work properly.
Possible Solution
①Remove the object with sticks, etc.
②Clean the filter
①Plug into the socket properly.
②Operation under the guide of
Manual
③Make sure the power on of socket
①Clean the filter, dust bin and
remove the items that cause clogging
firstly, then it can be used normally
when the protection device is
released after about 40 minutes.
②Press the switch again or plug and
press the switch again to let the
power on
③It is the character of this product,
just use it normally.
Restart the vacuum cleaner according
to product using instructions.
①Same to Malfunction 3
②Clean the filter or dust bin before
using
③Remove the items that cause the
clogging
①Plug into the socket properly.
②Place the main body on the
station under the guide of manual.
③UV lamp's normal working
o
temperature is 5 C to 60
make sure using vacuum cleaner
station under working temperature.
o
C , please
23