Product Using Instructions - LG VH920 Series Manual

Product using instructions

Use it as shown in the diagram
Insert the power plug into the power
1
socket.
When the power plug is inserted into
the power socket, it makes a sound with
'ddee~' sound.
Touch power switch must be pressed for
2
operation.
If touch switch is pressed vacuum cleaner
is converted to operation status with a
buzzer sound 'ddee~', and the Indicator
lamp turns on．
When you want to stop the operation.
3
When you press the touch switch of the
power indicator part, the operation stops
with the buzzer sound "ddee~", and the
lamp is turned off.
When you use vacuum cleaner station
4
Insert the power plug of the vacuum
cleaner into the power socket.
After you place the vacuum cleaner on the
on the
station, blue lamp
is turned on, and
UV lamp
for the ultraviolet irradiation at the same
time.
If it passes about 5 minutes after placing the
vacuum cleaner , the indicator window lamp
and UV lamp are automatically turned off at the
18
Product using instructions
indicator window
starts operation
same
time, and the ultraviolet irradiation is
completed.
If you want to repeat ultraviolet irradiation,
vacuum cleaner for about 15
please lift the
seconds and place it on the station again.
the operation , please place the vacuum
cleaner on the station for 5 minutes
ultraviolet irradiation.
Put vacuum cleaner into vacuum cleaner station
5
Make the boss in front of vacuum cleaner station
embed in groove of vacuum cleaner vibration plate.
Make the boss below vacuum cleaner mosaic to
the bulge of vacuum cleaner station.
When the vacuum cleaner is placed correctly,
the UV lamp indicator window show blue light.
When you stop
boss
groove
bulge