Haier HW70-BP1439N User Manual page 9

GB
3.4 Det ergent drawer
Open t he drawer, t hree compart ment s can be
seen (Fig. 3- 5):
Compart ment 1 : Water inlet only, no detergent
Compart ment 2 : Detergent for programme
Compart ment : Softener, Condit ioning agent etc.
The recommendat ion on t he type of detergent s is
suit able for t he various washing temperatures, please
refer to t he manual of detergent .
3.5 Funct ion but tons
The funct ion buttons (Fig. 3- 6) enable addit ional op-
t ions in t he selected programme before programme
st art s. The related indicators are displayed.
gramme, all opt ions are disabled.
If a button has mult iple opt ions, t he desired opt ion can
be selected by pressing t he button sequent ially.
To delete t he sett ing or to cancel t he sett ing process,
press t he funct ion button unt il t he desired LED light s
Not e: Factory set t ings
t here is no special requirement default sett ings are recommended.
3.5.1- Funct ion but ton " Temp."
Press t his button (Fig. 3- 7) to change t he washing
temperature of t he programme. If no value is illumi-
nated t he water will not be heat ed.
In conjunct ion wit h t he "St eam" button, t he child lock
3.5.2- Funct ion but t on "Speed"
Press t his button (Fig. 3- 8) to change or deselect t he
spin of t he programme. If no value is illuminated t he
laundry will not spun.
3.5.3- Funct ion but t on "St eam"
Press this button (Fig. 3- 9) to activate the steam function.When this function is activated
the default temperature is the maximum temperature of the programme selected.This
function can be activated only with the following programmes: Cotton, Synthetic, Mix,
Baby Care, Hygiene.When the function is activated the led above the button will light up.
Pushing again this button the function can be deactivated and the led above the button
will turn off.When the function is activated the temperature of
be changed.
( )
3- Cont rol panel
-
3.5.1 3.5.2
the programme cannot
3- 5
3- 6
3.5.3 3.5.4 3.5.5
3- 7 3- 8
9