Mixing The Inputs - Zoom H6 Operation Manual

Audio interface settings

Mixing the inputs

You can adjust the mix of the inputs. The results of this mix
are input to a computer or iPad. When in stereo mix mode,
the resulting stereo mix is sent.
1.
Press .
2.
Use to select
"INPUT&OUTPUT",
and press
3.
Use to
select "Mixer",
and press
68
(continued)
.
.
4.
Change the parameter
settings as desired.
■ Mixing controls
Move cursor/change value:
Select parameter to change:
5.
Press to listen to
the project without mixer
adjustments.
Pressing this button turns the
mixer settings on and off.
HINT
The same mix settings are saved and used for both stereo
mix and multi track modes.
Move up/down
Press