Loading An Sd Card - Zoom H6 Operation Manual

Loading an SD card

1.
Turn the power off and then open the SD card slot
cover.
2.
Insert the card in the slot.
To eject an SD card:
Push the card further into the slot and then pull it out.
SD card slot in
center of left side
14
NOTE
• Always turn the power off before inserting or removing an
SD card.
Inserting or removing a card while the power is on could
result in data loss.
• When inserting an SD card, be sure to insert the correct
end with the top side up as shown.
• When an SD card is not loaded, recording and playback
are not possible.
• See "Formatting SD cards" . (→ P. 95)