Table of Contents
Advertisement
When the device is connected with a USB cable to a PC, Press the
LEFT/RIGHT button for USB MSDC and press the ENTER button to
confirm. The film scanner will become a mass storage device and to
preview or edit images on PC.
You can also press MODE button to back to main menu.
26
8: Maintenance
Use the cleaning cloth to wipe down the scanning surface frequently, to
prevent dust from appearing on the captured images.
Use the provided cleaning brush to wipe away dust collected on the
lens. Make sure that it is in PHOTO MODE.(refer to use instructions
below)
1. Gently push the brush into the scanner.
2. Flip the cover open and look through the
transparent scanning surface.
3. Make sure that it is in PHOTO MODE.
4. Make sure that the brush is inserted fully
into the scanner and covering the lens.
5. Rotate the brush such that the arrow is
facing upwards
Note: if the brush cannot rotate, insert the
brush further into the scanner, checking
the position through the transparent
scanning surface. (repeat steps 2-4)
6. Move the brush gently forward and
backwards, sliding along the slot of the
scanner. The brush will now be wiping the
surface of the lens.
7. To remove, reverse the steps.
27
Advertisement
Table of Contents
