Index Unpack Device………………………………………………….. 2 II. Install Film into Holder ………………………………………... 3 III. Connect Device………………………………………………….. 7 IV. Install Bundled Software ………………..….………………….. 8 V. Use Device ……………………………………………………… 14 VI. Introduce User Interface ……………………………………... 19 VII. Specifications …………..……………………………………… 26 Appendix. Clean Device...
Unpack Device Nega ve Film Holder Slide Film Holder Film Scanner CD-ROM Clean brush User Manual USB cable We strongly suggest using a clean, dry, non-alcohol co on swab to insert into the lm scanner slot and clean the glass surface periodically to produce a clear image.
Install into holder Install the slide into holder: Open the slide holder as illustrated Put slide into ve slide slot 3. Close the lm holder...
Page 6
Install the nega ve lm into holder: Open the lm holder as illustrated Install lm into nega ve lm slot 3. Close the lm holder...
Page 7
To avoid mirror image, follow the serial numbers (from le to right) on top of lm when install nega ve lm into holder. Figure 1 If the image is upside down [see g. 2] , the image can be corrected by con nuously “Rotate”...
III. Device Copy bu on Power status LED USB Cable Film Slot Plug in USB cable to computer without installing any necessary driver. When the status icon on the le bu on corner shows inform n “Your device is ready to use”.
IV. Install bundled software The package bundled with a friendly and easy to use PC and Mac so ware that has for capture, save, delete, mirror, rotate and exposure and color control. Please follow the steps to complete the applic on insta n for PC and Mac.
Page 13
Remark: If you are using Win XP 64 or Vista 32/64, you may also need to run >...
Page 14
Mac: Turn on Mac computer. Insert the install on CD into the CD/DVD drive. Copy “ImageScanTool.mpkg” into hard disk and double-click it.
Device Put Film into lm holder Insert the holder into device Make sure USB cable is connected to the device and PC/Mac...
Page 17
To launch the so ware: PC: on Desktop, double-click on “Launch Image Scan Tool” icon. Mac: click on “Applic ” folder at the Dock, double-click on “Image Scan Tool.app”.
Page 19
Press “Copy” hard bu on to capture the image to store in thumbnail. Click on fun on of mirror, rotate, color and brightness control to make image to prefer state.
Page 20
Press Save to store captured images to hard disk. The images stored in thumbnail bar is cleared a er save. Retrieve saved images from the hard disk to further review and edit.
VI. Introduce user interface First step is always to select the correct Film Type. Nega ve Slide B&W...
Page 22
User can either click on “Snapshot” icon or press the hard key “Copy” touch n to capture images. Captured images will be rst stored in the thumbnail bar. Total of 12 thumbnail images are able to store in the bar. The image control, mirror, rotate, color and brightness in Image Scan Tool is preview instantly in Snap Shot window.
Page 23
Press the “Mirror” icon to p the Live View image to preview on the Snap Shot window. Or apply the Rotate fun on by pressing “Rotate” icon. The image will be ro ng in 9 degrees clockwise on one single click, con nue l the prefer posi on is set.
Page 24
To manually adjust the image brightness and color level, click on “Color/Brightness Adjustment” icon. A pop up window containing Brightness bar and Color R, G, B bar will show up on screen and pulling the level bar to make adjustment.
Page 25
To delete a image, select the thumbnail image wish to delete and click on “Delete” icon. The stored images in thumbnail bar need to be saved to hard disk. The default directory is shown as below:...
Page 26
Or user can save to a prefer hard disk loca on by pressing the directory icon. Another pop up window will show up to select the directory for saving images. Press “Save” icon to save images to hard disk. The thumbnail bar is cleared a er save.
Page 27
When completed the capture, user can press “Exit” bu on to quit this Image Scan Tool. Then, review captured images or process more fancy mo ca on with bundle so ware for...
VII. Image Sensor 8 mega CMOS sensor Multi-elements precision lens Focus Range Fixed focus Exposure Control Automatic, manual adjustment for enhancement Color Balance Automatic, manual adjustment for enhancement Scan Quality 2,400/4,800 dpi (SW Interpolation) Data Conversion 10 bits per color channel Scan Method Single pass Light Source...
Appendix. Clean Device When viewing without the film holder on the film slot if found any dust dot on live view window, user is able to clean it by using the bundled clean brush to wipe the dust. We strongly suggest using a clean, dry, non-alcohol co on swab to clean the glass surface periodically to produce a clear image during oper...