Disconnected Restart Function; Remote Upgrade - Ebyte NA111 User Manual

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

4.4.6 Disconnected restart function

After the device is disconnected, it attempts to actively connect to the server or waits for the

client to connect at a specified time, and if the time-out and no reconnection succeeds, the device

automatically restarts, preventing the network from recovering the connection after the device is

dropped.

Disconnect re-connection time: The interval between each attempt by a device to re-establish

the network.

Reconnections: The number of times the device attempts to re-establish the network, the

cumulative number of reconnections reaches the preset value, and if the connection is not successful,

the device will automatically restart.

The actual restart determination time is the disconnected re-connect time multiplied by the

number of reconnations.

It is recommended to configure the network outage restart time to 5S and the number of

network outage restarts to 5 times.

In order to facilitate late maintenance and upgrade functions and replace different firmware, NA,

NS, NT supports online upgrades, through our company to provide upgrade firmware users can

upgrade or replace the current firmware via the upper computer.

Firmware upgrade procedure:

Step 1: open the computer, select the equipment that needs to be upgraded, open the device upgrade

assistant in the menu bar;

Step 2: Click to select the firmware, open the corresponding firmware;

Figure 4-4 The first step of upgrading is explained

NA111 User Manual

Table of Contents