Table of Contents
Advertisement
Setup at H/PC
Execute "Run by specifying the file name" of the Start menu on the H/PC.
Fig. 3.2 H/PC File Name Specification Screen
Enter the following commands, according to the connection method used with the Host PC, and
click on the [OK] button.
If I/O Box is used
:
Windows
flce.exe
If RS-232C cable is used:
Windows
flce.exe /Y={com1, 115200, }
(baud rate: 115.2 Kbps)
Creation of the above described shortcut enables start-up from the shortcut.
If the [OK] button is clicked on, the following screen appears.
Fig.3.3
For information about the File Transfer Utility refer to the C Library Manual.
10
Advertisement
Table of Contents
