Shark VAC-THEN-STEAM MV2010 Owner's Manual page 7

1
ASSEMBLY
1 Slide the Telescopic Handle into the
cleaning unit until it locks into place.
Once in position, you never have to
remove the handle.
2 For your comfort, you can adjust the
height of the handle. To do so pull
the latch down on the handle tube
90 degrees to the open position.
Holding the handle, extend the tube
to the height that is right for you and
then close latch to lock into position.
MV2010_11_IB_ENG_110103.indd 3
2
3
3
Wrap cord around cord holders and
secure plug to cord.
NOTE: The Vac-Then-Steam™, is a
complete bare-floor cleaning and
sanitizing system. It comes "vacuum-
ready" out of the box.
QUICK TIP: For easier pushing and
pulling, extend the height of the
handle by using the telescopic latch
on the pole.
www.SharkVacThenSteam.com
English
3
11-01-03 1:26 PM