Table of Contents
Advertisement
Connecting the Units
Video input 2
(VIDEO 2/BACK CAMERA INPUT)
Violet/white
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
Connection method
Note:
• It is necessary to set to AV INPUT2 in SETUP when
connecting a rear view camera.
9
This product
20 cm
8 m
1.
Clamp the lead.
CAUTION
Pioneer recommends the use of
a camera which outputs mirror
reversed images, otherwise
screen image may appear
reversed.
RCA cable
(sold separately)
To video output
Extension lead (supplied)
Fuse resistor
2. Clamp firmly with
Rear view camera
needle-nosed
pliers.
Fig. 6
Advertisement
Table of Contents
