Functions; Streaming; Recording - Pepperl+Fuchs VOC10M-F256-B12-V1D-CR03 Manual

Industrial Event Camera

Functions

4 Functions
4.1

Streaming

Stream
HD
RTSP
4.2

Recording

The camera can record a video sequence in response to a trigger signal. The recording begins
with the set pre-run buffer time before the trigger point and ends the set post-run buffer time
after the trigger point.
Video recording properties:
Resolution
1920 x 1080
1280 x 720,
1024 x 576,
960 x 540,
800 x 450,
640 x 360
Trigger Settings
Digital Input
• A rising edge at the digital input triggers a recording.
UDP
• Sends the character string TRIG to UDP port 5002 of the camera.
Web Interface
• The trigger button at the top right of the user interface can be used to trigger the operation
manually.
When a trigger signal is detected, the blue status LED on the camera illuminates until all ongo-
ing recordings are complete. If the recording cannot be saved, the blue LED flashes several
times. Multiple recordings may overlap. At least two seconds must pass between each trigger.
No more than three recordings can run at the same time.
To ensure that there is always enough memory, there is a function that deletes older videos to
make sure there is enough space available.
20
Resolution FPS
1280 x 720, 24
1024 x 576,
960 x 540,
800 x 450,
640 x 360
640 x 360 3
FPS
24
Codec/Container URL
MJPEG http://<camera-ip>/stream-hd
H264 RTSP rtsp://<camera-ip>:<rtsp-
port>/< rtsp-path>
Codec/Container
H264 MP4, adjustable quality