Loading A File - Casio WK-3300 User Manual

Saving Data

Loading a File

Use the procedures in this section when you want to load data
from external storage media into the keyboard's user area.
IMPORTANT!
• Note the following important points whenever using the
SMF Player Mode to play back data saved with the above
procedure.
* SD Memory Card
To perform the procedure below, you must have an
SD memory card to which SMF data has been copied
from a computer. Insert an SD memory card that you
have formatted on the keyboard into the card slot of
your computer, and copy the SMF data you want to
load into the directory named "MUSICDAT". Note that
you will not be able to load the data if it is not located
inside the "MUSICDAT" directory. If you create a sub-
directory inside of the "MUSICDAT" directory, the
keyboard will not be able to load any data inside the
sub-directory.
* Floppy Diskette (WK-3800 only)
This keyboard is able to see only files that are in the
top (root) directory of the floppy diskette. It will not be
able to see any files that are located in a subdirectory.
PREPARATION
• SD Memory Card
• Insert the SD memory card that contains the data you
want to load into the keyboard's card slot.
• Floppy Diskette (WK-3800 Only)
• Insert the floppy diskette that contains the data you
want to load into the keyboard's floppy disk drive.
NOTE
• Depending on the type and the amount of data involved
and type of media you are using (SD memory card or
floppy diskette*), a data save or load operation can take
anywhere from a few minutes to more than 30 minutes
to complete. The message "Pls Wait" will remain on the
display to indicate that a data save or load operation is
being performed.
* WK-3800 only
IMPORTANT!
• Never try to perform any operation while "Pls Wait" is
displayed. Performing any operation can cause Flash
memory, or memory card or floppy diskette data to be
deleted, and damage the keyboard's memory and cause
it to malfunction.
E-90
To recall file data from external storage media
1
What you should do first depends on the type of
external storage media you are using.
• SD Memory Card
On the WK-3800, press the DISK/CARD button twice.
On the WK-3300/WK-8000, press the CARD button
once.
• This causes the CARD indicator (the DISK/CARD
indicator on WK-3800) to appear on the display, and
also displays "Card" in the display's text area.
• Floppy Diskette (WK-3800 Only)
Press the DISK/CARD button.
• This causes the DISK/CARD indicator to appear
on the display, and also displays "Disk" in the
display's text area.
NOTE
• After pressing the DISK/CARD button (WK-3300/WK-
8000: CARD button) once, you can use the [ ] and [ ]
CURSOR buttons to select the external storage media.
2
Press the [ ] CURSOR button to display the Card
Mode (or Disk Mode) menu.
3
Use the [ ] and [ ] CURSOR buttons to display
the "Load" screen.
4
Press the [ ] CURSOR button to advance to the
file type selection screen.
5
Use the [ ] and [ ] CURSOR buttons to select the
type file you want to load.
6
Press the [ ] CURSOR button to display the file
name selection screen.
7
Use the [ ] and [ ] CURSOR buttons or [+] and [–]
buttons to select the name of the file you want to load.
• You could also use the number buttons to input a
three-digit file number. The file number is shown in
the number area of the display.
8
Press the [ ] CURSOR button to advance to the
user area selection screen.