5.Preparing the scooter for use
CAUTION!
There is a danger of crushing. Carefully unfold the scooter. Pay special
attention to your fingers.
The scooter is delivered in the folded state. To prepare it for use, you
need to unfold it. The scooter must be prepared for use by an adult.
1.Place the scooter so that the rear roller is on the ground and the tread
is parallel to the ground.
2.Press the button for the folding mechanism
column
upwards until it engages with a clicking sound. The button will
automatically pop back out.
3.Assemble the handles: For this purpose, release the handles
the holder
. Press the metal pins and insert the handles into the
openings of the steering column
6.Adjusting the height of the handlebar
The adjustment of the handlebar height must be performed by an adult.
The handlebar can be adjusted to three different height positions:
approx. 69.5 cm, 74.5 cm, 79.5 cm.
1.Loosen the locking lever
2.Press the metal pin on the steering column
column to the desired height until the metal pin engages.
3.Secure the steering column
EN
Risk of injury!
, so that the metal pin engages.
on the steering column
by re-tightening the locking lever
and pull the steering
.
and push the steering
from
.
Need help?
Do you have a question about the 371-033 and is the answer not in the manual?
Questions and answers