Risk Of Injury - HOMCOM 371-035 Assembly Instruction Manual

5. Preparing the scooter for use
CAUTION!
There is a risk of crushing. Unfold the scooter carefully. Pay special
attention to your fingers.
The scooter is delivered in a folded state and must be unfolded to
prepare it for use.
1. Position the scooter so that the rear wheel touches the ground and the
tread is parallel to the ground.
2. Press the button for the folding mechanism inwards
steering column
automatically pop back out.
3. Assemble the handles: For this purpose, release the handles
the holder. Press in the metal pins and insert the handles into the
openings in the steering column
place.
6. Adjusting the height of the handlebar
The height of the handlebar can be adjusted continuously within a range
of approx.85-108 cm. You will need an Allen key (not included).
1. Loosen the locking screw
EN

Risk of injury!

upwards until it clicks into place. The button will
so that the metal pin snaps into
with an Allen key.
and pull the
from