Casio PX-410R User Manual page 95

Registration Memory
Number of Setups:
Memory Contents:
Mixer Function
Channels:
Parameters:
MIDI:
Other Functions
Pitch Bend Range:
Transpose:
Tuning:
LCD:
SMF Player:
Supported Format:
Flash Memory
Capacity:
Shared Area:
SD Memory Cards
Supported SD Memory Cards:
Functions:
Pedals:
Terminals
SD CARD SLOT
USB port:
Headphones:
Pedal:
Power:
Microphone In:
Pedal connector
(for optional SP-30 only)
Speakers:
*1 The same memory area is used to store waveform data, accompaniment data, and SMF data.
*2 Noted capacities are calculated values based on 1MB = 1024
32 (4 setups × 8 banks)
Tone, Rhythm, Tempo, Layer on/off, Split on/off, Split point, Harmonize on/
off, Mixer settings (Channels 1 to 10), Effect settings, Touch Response settings,
Soft/sostenuto pedal jack setting, Transpose, Tuning, Accompaniment volume
setting, Pitch bend range, Auto Harmonize type, MODE button setting, Synchro
standby state, Mixer Hold, DSP Hold, Synthesizer Mode parameters
16
Tone; part on/off; volume; pan pot; octave shift; coarse tune; fine tune; reverb
send; chorus send; DSP line; DSP level, DSP pan, DSP system reverb send, DSP
system chorus send
16 multi-timbre receive, GM Level 1 standard
Adjustable (12 semitones upwards and downwards)
49 steps (–24 semitones to +24 semitones)
Variable (A4 = approximately 440Hz ±100 cents)
Adjustable contrast
Flash memory storage for up to 200 files*
SMF0
4MB* 2
Approximately 3.5MB* 2 (waveform data, accompaniment data, SMF data)
Further storage of waveform, accompaniment, and SMF data becomes
impossible after the total of such data reaches approximately 3.5MB.
1GB or less (Cards with capacity greater than 1 GB are not supported.)
Save and load of data; playback of SMF; card formatting; file delete; file rename
Damper, Soft/Sostenuto (Selectable)
TYPE B
Stereo standard jacks × 2
Output Impedance: 170Ω
Output Voltage: 6.0V (RMS) MAX
Standard jacks × 2
12V DC
Standard jack (with microphone volume knob)
Input impedance: 3.3KΩ
Input sensitivity: 10mV
(16cm × 8cm OVAL) × 2 + ‡5cm × 2 (Output: 8.0W + 8.0W)
2 bytes.
Specifications
1
E-93