Nice NICE1 User Manual page 3

QUICK START GUIDE
Consult a healthcare professional before using NICE1.
It is recommended to read entire user manual before beginning. Refer to the
individual wrap guides for specific information regarding wrap use.
4 NICE RECOVERY SYSTEMS
• Connect the power cord to the
external power supply.
• Plug the circular connector into
the back of the Cooling Unit. You
will hear a click when properly
connected.
• Plug the power cord into the wall
outlet.
• Place the wrap on the appropriate
body part. Secure with hook
and loop.
• Connect the hose to the wrap. You
will hear a click when properly
connected.
Caution: Therapy wraps are
non-sterile and should never
be directly applied to an open
wound or breached skin
• Connect the hose to the Cooling Unit.
You will hear a click when properly
connected.
3-100176, REV E
Settings for temperature, compression, and duration should be used as directed
by your physician or medical professional.
STEP 1
Turn on the power switch on the back of the
device. The touch screen will illuminate and
display the "Nice" logo. Push NEXT. Review
the checklist on the touch screen. Confirm and
press NEXT.
STEP 3
Select desired COMPRESSION LEVEL and
COMPRESSION TYPE and press NEXT.
STEP 5
Review and confirm your settings by pressing
START or press BACK to change the settings.
3-100176, REV E
STEP 2
Select desired COLD LEVEL and press NEXT.
Cold Settings are as follows:
Level 1 = 58F (14.4C)
Level 2 = 54F (12.4C)
Level 3 = 50F (10C)
Level 4 = 46F (7.7C)
Level 5 = 42F (5.5C)
STEP 4
Choose a MANUAL time setting of 5 – 40
minutes for a single therapy session OR
choose a PRESET PROGRAM for multiple
sessions and press NEXT.
STEP 6
During your therapy session you can change
the cold or compression settings simply by
pressing 1 – 5 or HIGH, MED
or LOW. To Dim, Press Dim switch, to brighten
- touch screen.
NICERECOVERY.COM
5