Maintenance And Cleaning; Draining The Water From The Unit - Nice NICE1 User Manual

9

MAINTENANCE AND CLEANING

9. 1 . COOLING UNIT
• There are no user serviceable internal parts. The system warranty is
voided if the tamper resistant screws are breached or removed.
• Keep water away from vents, power supply, and the power cord
connection of the unit.
• To avoid possible electric shock, do not remove the cover of
the unit.
• Do not immerse the Cooling Unit in water or any liquid.
• If the water becomes discolored or offensive to smell, contact supplier
or Durable Medical Equipment (DME) provider for assistance. If
microbial growth is present, the unit should not be used.
• Wipe the exterior of the unit with a damp cloth to clean.
• Do not use abrasive or solvent-based cleaners on the unit.
9. 2 . WRAPS
• Clean the therapy wrap if used for longer than 2 weeks or when
noticeably dirty.
• Clean exposed surfaces of the therapy wrap with either a mild
anti-bacterial soap and water solution or an isopropyl alcohol
and water solution (90:10).
• Do not use abrasive or solvent-based cleaners on the wrap.
• Do not use bleach on the wrap.
• See wrap specific instructions for use for additional information.
10 DRAINING WATER FROM THE UNIT
Between uses or if the Cooling Unit is going to be stored for a long period
of time, the water reservoir should be drained.
1. Turn the Cooling Unit OFF.
2. Disconnect the therapy wrap from the hose.
3. Connect the Drain Fitting to the end of the hose.
Note: Drain completely before traveling on an airplane or shipping.
18
NICE RECOVERY SYSTEMS 3-100176, REV E
4. Place the tapered end of the drain fitting in bottle or
another receptacle, capable of holding a minimum of
350mL.
5. Turn the Cooling Unit ON.
6. Press the DRAIN COOLANT button.
7. Review the checklist and press NEXT.
3-100176, REV E
NICERECOVERY.COM
19