Read First; Safety Information - KPS DCM4010FLEX User Manual

DCM4010FLEX

Read First

!

Safety Information

!
To ensure safe operation and service of the meter, follow these instructions.
Failure to observe warnings can result in severe Injury.
Warning
!
Identify hazardous conditions and actions that could cause
BODILY HARM or DEATH
- Individual protective equipment should be used if HAZARDOUS LIVE parts in
the installation where measurement is to be carried out could Be ACCESSIBLE.
- If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
- To reduce the risk of fire or electric shock, do not expose this product to rain
or moisture.
- Verify the Meter operation by measuring a known Current. If in doubt, have the
Meter serviced.
- Do not apply more than the rated voltage/Current, as marked on Meter.
- To avoid false readings that can lead to electric shock and injury, replace
battery as soon as low battery indicator.
- Do not use Meter around explosive gas or vapor.
- Do not use a flexible current sensor if the inner copper wire of the flexible cord is visible.
- De-energize the installation under test or wear suitable protective clothing
during fitting a removal of the Flexible Current Probe.
- Do not apply around or remove from UNINSU LATED HAZARDOUS LIVE
conductors, which may render electric shock, electric burn, or arc flash.
Caution
!
Identify conditions and actions that could cause DAMAGE the meter or
equipment under test. Do not expose Meter to extremes in tempera- ture of high
humidity.
Flexible AC current probe
01
Do not touch the area above
the LCD during measurement
EN