Table of Contents
Advertisement
3.8 P
S
ERIPHERAL
ETUP
When you select the "PERIPHERAL SETUP" on the main program, the screen display will appears
as:
Peripheral Setup Screen
OnBoard FDC
Floppy Drive Swap
OnBoard Serial PortA
OnBoard Serial PortB
IR I/O pin Location Select
Serial PortB Mode
IrDA Protocol
IR Port Support
IR Mode Select
IR IRQ Select
IR DMA Select
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
OnBoard PCI IDE
Primary Master Prefetch
Primary Slave Prefetch
Peripheral Setup options are displayed by choosing the Peripheral Setup icon from the WINBIOS
Setup main menu. All Peripheral Setup options are described in this section.
Onboard FDC : This option enables the floppy drive controller on the motherboard. The settings are
Enabled or Disabled . The Optimal default setting is Enabled . The Fail-Safe default setting is
Disabled.
Onboard Serial PortA : This option enables serial port A on the motherboard and specifies the
base I/O port address for serial port A. The settings are 3F8h, 3E8h , or Disabled . The Optimal
default setting is 3F8h . The Fail-Safe default setting is Disabled .
AMI BIOS SETUP – PERIPHERAL SETUP
© 1997 American Megatrends, Inc. All Rights Reserved
AP-545V/45
Enabled
Disabled
3F8h/COM1
4 Enabled
2F8h/COM2
SINB/SOUTB
Normal
N/A
N/A
N/A
Auto
N/A
378h
Bi-Dir
N/A
7
N/A
Enabled
Enabled
Enabled
AMI BIOS SETUP
Available Options
Auto
Disabled
-¯
ESC : Exit
: Sel
PgUp/PgDn :
Modify
F2/F3 : Color
Advertisement
Table of Contents
