Refuelling The Car - Alfa Romeo STELVIO 2022 Owner's Handbook Manual

Table of Contents

Advertisement

REFUELLING THE CAR

152) 153) 154)
Always stop the engine before refuelling.
PETROL ENGINES
Only use unleaded petrol with an octane
number (R.O.N.) not lower than 95
(EN228 specification).
DIESEL ENGINES
Only use Diesel fuel for motor cars
(EN590 specification).
REFUELING PROCEDURE
The fuel flap is unlocked when the central
door locking system is released, while it
is automatically locked when the central
locking system is applied.
Opening the flap
To refuel proceed as follows:
open flap (1) fig. 198, pressing on the
point shown by the arrow fig. 199;
remove the closing cap (2);
return the cap to its seat (4);
introduce the nozzle in the filler and
refuel;
once refuelling is complete, before
removing the fuel nozzle, wait at least 10
seconds to allow the fuel to flow into the
tank;
then remove the dispenser from the
filler, close the cap and then close the
flap.
176
The refuelling procedure described
above is illustrated on the label (where
provided) located inside the fuel flap.
198
199
TOPPING UP AdBlue ® DIESEL
EMISSIONS ADDITIVE
(2.2 JTD versions only)
155)
Preliminary Conditions
AdBlue ® freezes at temperatures lower
than 12.2 °F (-11 °C). If the car stands for
a long time at this temperature refilling
could be difficult. For this reason, it is
advised to park the car in a garage and/or
heated environment and wait for the
AdBlue ® to return to liquid state before
topping up.
Proceed as follows:
park the car on level ground;
switch off the engine by turning the
ignition device to STOP;
open the fuel flap A (1) fig. 201 and then
unscrew and remove the cap (3) (blue)
from the AdBlue ® filler and put it in the
stowing position provided (4).
07226V0042EM
Refilling with nozzles
You can fill up at any AdBlue ®
distributor.
Proceed as follows:
insert the AdBlue ® nozzle in the filler,
start refilling and stop refilling at the
first shut-off (the shut-off indicates that
the AdBlue ® tank is full). Do not proceed
with the refilling, to prevent spillage of
AdBlue ® ;
07206V0001EM
extract the nozzle.
Refilling with containers
Proceed as follows:
check the expiration date;
read the advice for use on the label
before pouring the content of the bottle
into the AdBlue ® tank;

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents