Lane Keeping Assist (Lka) System - Alfa Romeo STELVIO 2022 Owner's Handbook Manual

aesthetic cover located under the interior
rear-view mirror. In the event of a failure
of the camera, contact an Alfa Romeo
Dealership.
58) Do not cover the operating range of the
camera with stickers or other objects. Also
pay attention to other objects on the bonnet
(e.g. a layer of snow) and make sure they do
not interfere with the camera.
59) The camera may have limited or absent
operation due to weather conditions such
as: heavy rain, hail, thick fog, heavy snow,
formation of ice layers on the windscreen
glass.
60) Camera operation may also be
compromised by the presence of dust,
condensation, dirt or ice on the windscreen
glass, by traffic conditions (e.g. cars that
are driving not aligned with yours, car
driving in a transverse or opposite way on
the same lane, bend with a small radius of
curvature), by road surface conditions and
by driving conditions (e.g. off-road driving).
Make sure the windscreen is always clean.
Use specific detergents and clean cloths
to avoid scratching the windscreen. The
camera operation may also be limited or
absent in some driving, traffic and road
surface conditions.
LANE KEEPING ASSIST (LKA)
SYSTEM
(where provided)
DESCRIPTION
55) 56) 57) 58)
The Lane Keeping Assist system
makes use of a camera located on the
windscreen to detect the lane limits and
calculate the position of the car within
such limits, in order to make sure that it
remains inside the lane.
When one or both lane limits are
detected and the vehicle approaches one
of them without the driver signalling the
intention to to do so (direction indicator
not on), the system will apply a torque to
the steering wheel to keep the vehicle in
the lane and will generate a visual signal
(the left or right lane will turn yellow).
According to the type of signal set, it can
also emit an acoustic signal and/or apply
a vibration to the steering wheel.
If the vehicle continues to go beyond the
line of the lane without any intervention
by the driver, the surpassed line will light
up on the instrument panel display (the
left or right lane will turn yellow with red
shading) fig. 189 to urge the driver to
return the vehicle into the limits of the
lane.
189
SYSTEM ON/OFF
The system can be turned on/off by
pressing the fig. 190 button or using
the "Driver Assistance" menu and then
selecting "Safety " on the Connect
system.
Each time the engine is started the
system maintains the operating mode
that was selected when it was previously
switched off.
The system is automatically switched off
when a trailer is coupled.
07076V0703EM
171