Sanyo DMP-692 Instruction Manual page 28

The MENU button on the remote control works the same way as the MENU button on
5).
your iPod. Press the MENU button repeatedly to access the Main Menu of your iPod.
Press the + or - buttons on the remote control to navigate Up or Down through the
displayed Menu list. When the desired Genre, Artist, Album, or Song is 'highlighted' on
your iPod Menu display, press the ENTER button on the remote control to 'Enter' or
'Select' the highlighted item. If the highlighted item is a specific song, pressing the
ENTER button will begin playback of that song.
If you have two iPod models, or an iPod and an iPhone docked at the same time you can
6).
switch between the two devices by pressing the iPod SELECT button on the top panel or
the remote control.
To pause iPod playback touch the
7).
on the remote control. Press again to release pause and resume iPod playback.
To stop iPod playback touch and hold the
8).
button on the remote control until your iPod shuts off and enters the 'Charging'
mode. However please note that the system power remains 'On'.
9).
To shut the system 'Off' completely, press the STANDBY/ON button on the top panel or
remote control. The control panel lighting turns 'Off' and any iPod or iPhone in the
docking area will shut off and enter the Charging mode.
iPod/iPhone OPERATION CONTROLS
control on the top panel or press the
control on the top panel or depress the
27
button