Sleep Timer - Sanyo DMP-692 Instruction Manual

This system includes a programmable Sleep Timer that allows you to fall asleep to between
10 and 120 minutes of music and then turns the unit to standby automatically.
To operate the sleep timer:
1.) Turn the system 'On' and operate the TUNER function as usual.
2.) Press the SLEEP button on the remote control or the SLEEP control on the top panel.
3.) The display will show "SLEEP 120"indicating that the sleep
timer will shut the power off after 120 minutes.
Repeatedly press the SLEEP button to decrease the amount of sleep timer operation.
4.) After a few seconds the Sleep Time display disappears and
the normal TUNER display returns, but the small SLEEP
indicator remains in the display. When the Sleep Timer
counts down to"00", the unit returns to the Standby
(Power 'Off") mode automatically.
Note:
•
You can shut the unit off manually before the Sleep Timer counts down to "00" by pressing
the STANDBY/ON button at any time.

SLEEP TIMER

20