Sanyo DMP-692 Instruction Manual page 20

PRESETTING STATIONS IN THE TUNER MEMORY
Recalling Preset Stations
Simply press the PRESET / MENU + or - buttons on the remote control or touch the PRESET
/ ALM1 - or PRESET / ALM2 + control on the top panel to scroll forward or backward through
the preset station memories.
Changing Preset Stations
Tune to the new station you want to memorize, press the TIME SET / MEMORY button on the
remote control or touch the TIME SET / MEMORY control on the top panel, then press the
PRESET / MENU + or - buttons on the remote control or touch the PRESET / ALM1 - or
PRESET / ALM2 + control on the top panel to select the memory number you wish to change.
When that memory number is flashing in the display, press the TIME SET / MEMORY button
once. The new station is entered in the memory and the previously memorized station is
erased.
Important: The back-up batteries will maintain the preset tuner memories in the event of a
power interruption. However if the back up batteries are not installed, or exhausted, and the
Adaptor is disconnected from the wall outlet or the plug is removed from the back of this
system, the preset tuner memories will be erased. It will be necessary to re-enter the stations
in the preset tuner memories when power is restored.
19