Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vicon V4300QS
Summary of Contents for Vicon V4300QS
- Page 1 X920 MODEL V4300QS COLOR QUAD SPLITTER VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788-9633 TELEPHONE: 516-952-CCTV (2288) FACSIMILE: 516-951-CCTV (2288) TOLL FREE: 1-800-645-9116 UK: 44/(0) 1489-566300 INFOFAX: 1-800-287-1207...
- Page 2 Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. Copyright © 1998 Vicon Industries Inc. All rights reserved. Product specifications subject to change without notice. Vicon and its logo are registered trademarks of Vicon Industries Inc. Vicon Part No. 8006-8920-01-00 Section 5 Rev 598...
- Page 3 We stand behind the quality and dependability of every product with an industry leading Beneficial Use warranty. If you are not satisfied with a Vicon product or service, I would like to know. Your complete satisfaction is the mission of every Vicon employee.
- Page 4 FCC Notice Note: Complies with Federal Communications Commission Rules & Regulations Part 15, Subpart B for a Class A digital device. WARNING This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instruction, may cause interference to radio and television reception.
-
Page 5: Table Of Contents
Camera ID Menu ............................10 Time/Date Menu ............................11 Auto Selector Menu............................11 Miscellaneous Menu ............................12 Operation ...........................13 Quad ................................13 VCR ................................13 Sequential Switching ...........................13 Camera Displays............................13 Maintenance ........................15 Shipping Instructions .......................15 Reference...........................17 Technical Information ..........................18 Contents • i X920 Rev 598 V4300QS... - Page 6 List of Figures Figure 1 Front Panel ................................. 1 Figure 2 Rear Panel ................................5 Figure 3 Alarm Connections............................7 ii • List of Figures X920 Rev 598 V4300QS...
- Page 7 Use only with a mounting accessory recommended by Vicon, or sold with the video product. Any mounting of the video product should follow Vicon’s instructions, and a mounting accessory recommended by Vicon should be used.
- Page 8 Vicon or that have the into such power lines or circuits. When installing an same characteristics as the original part. Unauthorized...
-
Page 9: Introduction
Programming for a complete description of front panel functions. The V4300QS is available in two versions. Model V4300QS is the NTSC version; model V4300QS-P is the PAL version. The term V4300QS is used to refer to both models unless specifically stated otherwise. - Page 10 VCR Interface The V4300QS has a VCR interface. The VCR input BNC accepts the video signal from the VCR and connects to the video output connector of the VCR. It allows the recorded tape to be played back. The VCR output BNC outputs the video signal to the VCR.
-
Page 11: Installation
Installation Unpacking and Inspection All Vicon equipment is tested and inspected before leaving the factory. It is the carrier’s responsibility to deliver the equipment in the same condition as it left the factory. Inspection For Visible Damage Immediately inspect the cartons upon delivery. Make a note of any visible damage on all copies of the carrier’s freight bill. -
Page 12: Video Connections
HIGH Z or HIGH IMPEDANCE. The last video device in the line must be terminated with 75 ohms. Note: If the V4300QS is not to be connected to a VCR, the output from the VCR OUT connector may be connected to a second monitor. This output displays the quad screen continuously. -
Page 13: Vcr Connections
VCR. The VCR OUTPUT BNC connector outputs the video signal to the VCR. This output is a quadrant display of video at all times. It is connected to the video input connector of the VCR. Installation • 5 X920 Rev 598 V4300QS... -
Page 14: Alarm Connections
VIDEO OUT connector on the VCR to the VIDEO IN connector on the other monitor and terminate the line with 75 ohms. The VCR can be connected to the V4300QS to allow it to respond to alarm inputs to the V4300QS. These alarm connections are discussed in the following section, Alarm Connections. - Page 15 Figure 3 Alarm Connections Installation • 7 X920 Rev 598 V4300QS...
- Page 16 8 • Installation X920 Rev 598 V4300QS...
-
Page 17: Programming
Programming Programming the V4300QS includes writing titles for the video inputs, assigning dwell times for sequencing operation, setting time and date, turning the buzzer and border on or off, and selecting the frame or field reset mode. All programming is done with the front panel keys. Each key has two functions, one when it is simply depressed and one when it is depressed in conjunction with SHIFT in the operation mode or used in programming. -
Page 18: Setup Menu
UP ( ) or DOWN ( ) key increases or decreases the character location just after or before the original in the string, respectively. To return to the Main Setup menu, press the QUAD key. 10 • Programming X920 Rev 598 V4300QS... -
Page 19: Time/Date Menu
(skips) the channel. If all channels are set to OFF, only the quadrant configuration displays when the AUTO key is pressed. To return to the Main Setup menu, press the QUAD key. Programming • 11 X920 Rev 598 V4300QS... -
Page 20: Miscellaneous Menu
FREEZE is very stable, but the resolution is less than that of the FRAME mode and the reality of a moving scene is less. 12 • Programming X920 Rev 598 V4300QS... -
Page 21: Operation
CH2, CH3, CH4) is pressed. Pressing both the SHIFT and VCR key switches the V4300QS to the VCR input mode. Press PLAY on the VCR to display the video playback from the VCR. In this mode, if a channel key is selected (CH1, CH2, CH3, CH4), each image is displayed on full screen with 2X digital zoom. - Page 22 14 • Operation X920 Rev 598 V4300QS...
-
Page 23: Maintenance
Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A. - Page 24 16 • Maintenance X920 Rev 598 V4300QS...
-
Page 25: Reference
CAUTION: Careful selection of the proper cable is essential to obtain the best performance from this equipment. Vicon assumes no responsibility for poor performance when cables other than those recommended are installed. In all cases, coaxial cable impedance should be 75 ohms. -
Page 26: Technical Information
Power Supply: Input: V4300QS: 120 VAC. V4300QS-P: 230 VAC. Output: 12 VDC, 1.2 A, 25 W. Plugs into a standard outlet; includes 6 ft (1.8 m) output cord with connector for V4300QS. 18 • Reference X920 Rev 598 V4300QS... - Page 27 Output to VCR: Video output to VCR is always quad screen display. Input from VCR: VCR may be played back through V4300QS and is full screen 2X digital zoom. Looping Outputs: Each camera has a looping video output that may be connected to other equipment.
- Page 28 MECHANICAL Dimensions: Height: 1.75 in. (4.4 cm). Width: 17.0 in. (43.2 cm). Depth: 11.5 in. (29.2 cm). Weight: V4300QS: 6.6 lb (3 kg). Power supply: 1.2 lb (0.5 kg). ENVIRONMENTAL Operating Temperature Range: 32° to 104° F (0° to 40°C).
Need help?
Do you have a question about the V4300QS and is the answer not in the manual?
Questions and answers