1. Manuals
  2. Brands
  3. Vicon Manuals
  4. Media Converter
  5. VI-DSP-2
  6. Setup and installation manual

Vicon VI-DSP-2 Setup And Installation Manual

Single-channel video analytics encoder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
XX180-65-00
Video Intelligence System
Model VI-DSP-2 Single-Channel
Video Analytics Encoder
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your
requirements or that the operation will be entirely error free or perform precisely as described in the
documentation. This system has not been designed to be used in life-critical situations and must not be
used for this purpose.
Copyright © 2007 Vicon Industries Inc. All rights reserved.
Product specifications are subject to change without notice.
Vicon and its logo, ViconNet and its logo are registered trademarks of Vicon Industries Inc in the United States and other countries.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: 44/(0) 1489-566300 WEB: www.vicon-cctv.com
Vicon Part No. 8009-8180-65-00
Section 1 Rev 0608

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VI-DSP-2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vicon VI-DSP-2

Summary of Contents for Vicon VI-DSP-2

  • Page 1 Product specifications are subject to change without notice. Vicon and its logo, ViconNet and its logo are registered trademarks of Vicon Industries Inc in the United States and other countries. VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788...
  • Page 3 Trademarks Vicon, the Vicon logo and ViconNet are registered trademarks of Vicon Industries Inc. Raven is a trademark of Mango DSP Ltd. Windows is a registered trademark of Microsoft Corporation.

  • Page 4: Table Of Contents

    ......................... 8 VERVIEW ..................8 ONNECTORS AND NDICATORS Front Panel ......................... 8 Rear Panel .......................... 9 ......................10 NSTALLATION Connecting the Cabling .......................11 Connecting the Power Supply....................12 CHAPTER 3. TECHNICAL SPECIFICATIONS ................ 13 CHAPTER 4. VICON STANDARD EQUIPMENT WARRANTY .......... 14...

  • Page 5: Preface

    Preface About this Document This guide provides network setup and installation instructions for the Model VI-DSP-2 MangoDSP Raven™ Single-Channel Video Analytics Encoder (encoder). Conventions Used in this Document Convention Example Names of buttons, windows and tabs Press the Next button.

  • Page 6: Chapter 1. Network Setup

    ETWORK ETUP Overview The encoder is used to capture analog camera outputs and provide IP encoded analytic data to the ViconNet Video Intelligence Video Analytics Server (VN-VI- SERVER). One encoder is required for each analog camera output. In order to communicate with the encoder(s), each must be set up with a unique IP address on your network.
  • Page 7 Model VI-DSP-2 Encoder Network Setup 198.168.0.62. In order to communicate with the encoder, your workstation has to be on the same network IP (198.160.0.XXX) as the encoder. If it is not, perform the following: 1. Disconnect your workstation from the network and connect its network interface with the Ethernet (ETH) connector on the rear panel of the encoder, using a crossed LAN cable or an Ethernet switch.
  • Page 8 Model VI-DSP-2 Encoder Network Setup 6. If your screen resembles the screen shown with an IP address and Subnet mask, write down your settings. You will need to reenter the settings when the procedure is complete. 7. Change the IP address to: 192.168.0.1, and the Subnet mask to: 255.255.255.0.
  • Page 9 Model VI-DSP-2 Encoder Network Setup 9. In the Command Prompt window, type ping 192.168.0.62. You should see a response similar to the window below. NOTE The encoder is preset with a default IP address of 192.168.0.62. 10. If you do not receive a response similar to that shown above, ensure that you...

  • Page 10: Encoder Network Setup

    A browser window will display. NOTE If you received a firmware update from Vicon and wish to upgrade your firmware version, click Write DSP Flash. Browse for the updated .bin file and click Write Flash to update.

  • Page 11: Resetting The Encoder

    Model VI-DSP-2 Encoder Network Setup 3. Enter Hostname, and select Fixed: Assign the following IP address configuration to the hardware. Enter the values in each field. Provide a unique IP address for the encoder. Click Save. NOTE Each encoder is preset with a unique MAC address that cannot be modified by the user.

  • Page 12: Chapter 2. Installing The Encoder

    Model VI-DSP-2 Encoder Installing the Encoder NSTALLING THE NCODER Overview Once you have assigned the encoder a unique network IP address, you can install it. The following paragraphs provide connection and installation information for the encoder. Connectors and Indicators Front Panel...

  • Page 13: Rear Panel

    Model VI-DSP-2 Encoder Installing the Encoder Rear Panel Connector or Indicator Function RS232/485 See the RS232/485 Interface Pin Out Data table for more information. TTL IN/OUT Provides connection for 4 TTL inputs and 4 relay outputs. See the TTL IN/OUT Pin Out Data table for more information.
  • Page 14 Model VI-DSP-2 Encoder Installing the Encoder TTL IN/OUT Pin Out Data Pin Number Description RLY1_COM RLY1_NO RLY1_NC RLY2_COM RLY2_NO RLY2_NC RLY3_COM RLY3_NO RLY3_NC RLY4_COM RLY4_NO RLY4_NC ALARM_IN1 ALARM_IN2 ALARM_IN3 ALARM_IN4 GND_DIGITAL Unused Unused Unused Unused Unused Unused Unused...

  • Page 15: Installation

    Model VI-DSP-2 Encoder Installing the Encoder Installation Mount the encoder in a level, clean and dry indoor location on a shelf on in a rack. The room or area temperature is climate controlled for human occupancy Connect power supply, network cable, video cables and ground as follows. A typical network installation is shown in the following figure.

  • Page 16: Connecting The Power Supply

    Model VI-DSP-2 Encoder Installing the Encoder Connecting the Power Supply Connect the power supply as follows: 1. Connect ground wire to rear panel GND terminal. 2. Connect power supply output to rear panel PWR 5V-12 connector. 3. Connect power supply to AC power.

  • Page 17: Chapter 3. Technical Specifications

    Model VI-DSP-2 Encoder Technical Specifications ECHNICAL PECIFICATIONS Input Voltage: +5 to 12 VDC; 3 A to 1.25 A Processor: 1 TI DM642 @ 600/720 MHz. Video Input: 1 Composite BNC. Video Output: 1 Composite BNC. UART: RS232 or RS485/422 (Simplex and Full Duplex).

  • Page 18: Chapter 4. Vicon Standard Equipment Warranty

    Software supplied either separately or in hardware is furnished on an “As Is” basis. Vicon does not warrant that such software shall be error (bug) free. Software support via telephone, if provided at no cost, may be discontinued at any time without notice at Vicon’s sole discretion.

Table of Contents