Amino Nova User Manual

Nova Remote Control User Guide
Note: Some button functionality (for example, DVR) may not be
available on specific models of STB, and availability of certain
features is dependent on your service provider.
1. Inserting batteries
1. Press the indent on the battery housing cover and
slide it downwards to remove.
2. Insert 2 x AA batteries, observing the correct polarity.
3. Refit the battery housing cover.
Battery information
Do not mix different types of battery or old and new batteries.
Do not use rechargeable batteries with the remote control. Do not
attempt to recharge the batteries.
Remove the batteries from the remote control if you are not going
to use it for several weeks, to avoid the risk of leakage.
Immediately remove any leaking batteries. Take care when handling
leaking batteries as they may cause burns to the skin or eyes, or
other physical injuries.
Please respect the environment and any local regulations and
dispose of old batteries in a responsible manner.
Remote control layout
1 Power on/off button
2 TV input select button
Device control buttons
3 for TV, STB, DVD or AUX (if
programmed)
Options button for on-
4
screen menu items
5 Back button
6 On-screen menu button
Exit from on-screen menu
7
(or back to Live TV) button
Electronic program guide
8
(EPG) button
Previous channel select
9
button
Volume up and down
10
buttons
Input button for a full stop
11 (period) or for displaying
the on-screen keyboard
12 DVR button*
13 Live TV button*
14 Setup button for Nova
Transport buttons for Live
15
TV, DVR or VOD
16 Record start/stop button
Program information
17
button
18 Navigation and OK buttons
19 VOD button*
20 Colour buttons*
2. Remote control setup: Brand Search
The Nova remote control can be programmed to operate your TV set
or another device, for example a DVD player. The Nova does this by
registering a 5-digit brand code that is specific to the device.
1. Note the brand of your device, then find its 5-digit brand code
by referring to the brand code tables on the Amino resources
page (www.amino.tv/resources). Make a note of the 5-digit brand
code.
2. Make sure your device is turned on.
3. On the remote control, press the device control button (3) for
the device you want to control, for example if you want to control
a DVD player, press DVD.
4. Press and hold the Setup button (14) for approximately three
seconds until the device control button flashes twice.
5. Enter the 5-digit brand code for your device. On each digit entry
the device control button will flash. If you make an error, the LED
will give a single long flash.
6. Press the Power on button (1). If your device turns off then setup
is complete.
7. If your device does not turn off, repeat the setup procedure
using another code (if listed) for the device. You may need to try
several codes.
If you change your device to a different brand and the remote
control requires re-programming, repeat this brand search
procedure with your new device.
If your device is not listed, or you have tried all the codes listed for it
and it still does not respond to the remote control, your device may
still be supported and you should try the Auto Search method.
Channel up and down
21 buttons or Page up and
down buttons for EPG
22 Mute button
Channel and text entry
23
buttons
Closed captions on/off
24
button
25 Media button*