Download Print this page

Regulatory Compliance Information - 70mai X200 User Manual

Hide thumbs Also See for X200:

Advertisement

recorded by this dash cam are for reference only.
The eMMC (Embedded Multi Media Card) is built in the
dash cam for storage. You can find the memory capacity
information on the label of the dash cam and product
box.
Install this dash cam correctly, and do not block the
driver's line of sight, nor block the vehicle's airbag, in
order to avoid product failure or personal injury.
Use the included car charger, power cord, and other
accessories in order to avoid product failure due to non-
conformance. We shall not be held liable for any loss or
damage caused by the use of a non-genuine car charger
or power cord.
The dash cam is equipped with a built-in battery that
cannot be removed. Do not disassemble the dash cam.
Do not expose batteries or battery packs to sunlight,
fire, or environments where the ambient temperature is
extreme heat. There is a risk of explosion if the battery is
incorrectly installed, therefore only use and replace with
the same or an equivalent type of battery.
Keep the dash cam away from water drops or splashes.
Keep the device dry to avoid battery failure.
If the battery becomes deformed, swollen, or starts
leaking during use or storage, stop using the dash cam
immediately in order to avoid safety issues, and contact
after-sales service.
Never wash the dash cam with chemical solvent or
cleaner.
Keep the dash cam away from any strong magnetic fields,
as they may cause damage to the dash cam.
Do not use the dash cam in environments with
temperatures over 60°C or below -10°C.
After working for a period of time, the case temperature
of the dash cam will rise, please be careful when
touching it.
Only use this dash cam within the scope permitted by
law.

Regulatory Compliance Information

WEEE Information
All products bearing this symbol are waste
electrical and electronic equipment (WEEE
as in directive 2012/19/EU) which should
not be mixed with unsorted household
waste. Instead, you should protect human
health and the environment by handing over your
waste equipment to a designated collection point
for the recycling of waste electrical and electronic
equipment, appointed by the government or local
authorities. Correct disposal and recycling will help
prevent potential negative consequences to the
environment and human health. Please contact the
installer or local authorities for more information
about the location as well as terms and conditions of
such collection points.
04

Advertisement

loading