Table of Contents
Advertisement
IV OPERATION
THE OPERATOR OF THIS HEDGE TRIMMER IS RESPONSIBLE FOR
ACCIDENTS OR HAZARDS OCCURRING TO HIMSELF,
FOR PROPER OPERATING INSTRUCTIONS FOR THE ENGINE
S
TARTING
T
E
HE
NGINE
A
TTACHMENT
1 1 . . Place the hedge trimmer flat on the
ground, or other stable surface.
2 2 . . Slide the ignition switch to the START
position.
3 3 . . Proceed with engine starting
instructions found in your Tiller Manual.
!
WARNING
AVOID ACCIDENTAL BLADE
ENGAGEMENT.
DO NOT SQUEEZE THE THROTTLE
TRIGGER WHEN STARTING.
MAINTAIN PROPER IDLE SPEED
ADJUSTMENT (2200-2300 RPM)
WARNING
!
OTHER PEOPLE OR THEIR PROPERTY.
CHECK YOUR TILLER MANUAL
W
T
T
ITH
HE
RIMMER
Single edge hedge
trimmer attachments
DANGER
!
DANGER
!
S
TOPPING
THE
A
TTACHMENT
1 1 . . Release the throttle trigger and allow
engine to idle.
2 2 . Slide ignition switch to the STOP
position.
3 3 . Make sure blades have come to a com-
plete stop before releasing either handle.
Double edge hedge
trimmer attachments
WARNING
!
IF ENGINE DOES NOT STOP WHEN
SWITCH IS PUT IN THE STOP
POSITION, RELEASE THE THROTTLE
TRIGGER, ALLOW ENGINE TO IDLE.
PUT THE TRIMMER DOWN, AND
PULL THE CHOKE BUTTON OUT TO
COLD START (CLOSED) POSITION.
CHECK AND REPLACE
IGNITION SWITCH BEFORE
STARTING ENGINE AGAIN.
E
W
T
T
NGINE
ITH
HE
RIMMER
DANGER
!
9
Advertisement
Table of Contents
