MiniPCIeCAN-II
MiniPCIe Interface CAN Card User Manual
4.1.2 Filter Settings
In the device operation window, click the "Filter Settings" button to set the filter (if you
do not need to set the filter, you can skip this step), as shown in Figure 4.4.
The Filter Settings dialog box is displayed, as shown in Figure 4.5.
Select the filter mode. Set the CAN frame to be filtered by setting the filter.
Figure 4.4 Filter Setting 1
Figure 4.5 Filter Setting 2
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
11
User Manual