Connection; Connecting To Monitor; Connecting To Power - Samsung SCO-2120R User Manual

Connection

Connecting to Monitor

Please connect the video output terminal located on the back of the camera to the
monitor.
CCD Camera
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and
select 75Ω for the Intermediate device as shown in the picture below.
CCD Camera
COLOR CCD CAMERA
Monitor
Intermediate End monitor
12
User Guide

Connecting to Power

The recommended adaptor specification for SCO-2120RN/P is DC 12V/4A, AC
24V/1A over.
Please check the standard power requirement before connecting the power.
When the resistance value of copper wire is at [20°C(68°F)]
2
Copper wire size(AWG) #24(0.22mm ) #22(0.33mm
Resistance value(Ω/m) 0.078
Voltage drop(V/m) 0.028
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore having an excessively long distance between the power adaptor and the
camera may affect the camera's performance.
✽ Standard voltage for camera operation : DC 12V±10% / AC 24V±10%
✽ There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
Notes
• P lease use a power adaptor that meets the required standards.
• P lease connect the power after installation.
COLOR CCD CAMERA
2 2 2
) #20(0.52mm ) #18(0.83mm )
0.050 0.030 0.018
0.018 0.011 0.006
13
User Guide