Samsung SCO-2120R User Manual page 15

Operating Your Camera
EXPOSURE
MAIN SETUP
SSDR
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
SPECIAL
1. Press the Function Setup Switch to access the main setup menu and then position the
indicator over 'EXPOSURE' by moving the up or down direction of the Function Setup Switch.
2. Press the Function Setup Switch to confirm.
BR IGHTNESS : Use this feature to adjust image brightness. Position the indicator over
'BRIGHTNESS' by moving the up or down direction of the Function Setup
Switch. Then increase or decrease brightness level by moving the up or
down direction of the Function Setup Switch while verifying the changes
on screen. Set END once desired level is obtained.
EXPOSURE SETUP
BRIGHTNESS
||||||||||||
IRIS
IRIS : Set 'IRIS' to 'AUTO' or 'MANUAL'. Position the indicator over 'IRIS' by moving the up
or down direction of the Function Setup Switch and then select the desired iris
mode by moving the left or right direction of the Function Setup Switch.
EXPOSURE SETUP
BRIGHTNESS
||||||||||||
IRIS
SHUTTER
- AUTO : The iris is automatically activated upon illumination.
- MANUAL : Manual iris configuration. Set 'IRIS' to 'MANUAL' by moving the left or right
COLOR CCD CAMERA
ON
ATW
OFF
OFF
50
|
|||||||||||||
AUTO
| 50
|||||||||||||
AUTO
---
28
User Guide
direction of the Function Setup Switch and then press the Function Setup Switch. Increase or
decrease iris level by moving the left or right direction of the Function Setup Switch while verifying
the changes on screen.
IRIS AUTO SETUP
▶OPEN LIMIT 938
|
|||||||||||||||||||| |||
CLOSE LIMIT 1
|
|||||||||||||||||||||||||
RETURN
SHUTTER : Control image brightness by adjusting shutter speed.
 Position the indicator over 'SHUTTER' by moving the up or down direction of the
Function Setup Switch. Then select the desired shutter mode (A.FLK, ESC, MANUAL)
by moving the up or down direction of the Function Setup Switch.
EXPOSURE SETUP
BRIGHTNESS
||||||||||||
IRIS
SHUTTER
AGC
- MANUAL : Manual shutter speed setting.
- A.FLK (NTSC: 1/100, PAL: 1/120) : Flicker-free mode.
- ESC : Automatic shutter speed setting (optimal).
Auto operation is possible only when the IRIS is set to MANUAL.
 If you choose 'MANUAL', select the optimal shutter
speed.
- In MANUAL mode, the optimal shutter speed needs
to be designated. Select from 1/60 to 1/120,000
(NTSC) or from 1/50 to 1/120,000 (PAL).
* 'Sens-Up' mode can be configured manually
(2x to 512x).
- Verify changes made to the shutter speed by
referencing to changes the 'on-screen' brightness.
 Press the Function Setup Switch to complete.
COLOR CCD CAMERA
IRIS MANUAL SETUP
▶IRIS F-No F1.6
IRIS MAN 1023
|
|||||||||||||||||||||||
RETURN
| 50
|||||||||||||
AUTO
---
HIGH
SHUTTER MANUAL SETUP
▶SHUTTER VAL 1/50
RETURN
29
User Guide