Advertisement
2. PROGRAMMING OUTPUTS (MOD AND RELAY) WITH NO RESET
PROGRAM
MOD 1
ACTION
Fig. 63. Program - Action.
All manuals and user guides at all-guides.com
MENU
2.1.6. ACTION
PROGRAM
MOD 1
ACTION
1. From the menu, use the
HEAT
COOL
REV ACT
2. Press the
DIR ACT
3. Use the
HUMID
DEHUMID
4. Press the
SELECT
ACTION
FOR
MOD 1
M24583
2.2. Program Next Output
For the next output, select the desired MOD or Relay from
the Program menu (see Fig. 57 on page 25).
Go to "2.1.2. SETPOINT" on page 25 to continue
programming.
When you finish programming the outputs, continue with
"1.3. Exit Programming without Reset".
1.3. Exit Programming without Reset
Press the HOME button to leave programming mode and
return to the home screen.
This completes the programming procedure for
controllers that do not use Reset.
27
T775U SERIES 2000 CONTROLLER
and
light ACTION.
Default: HEAT
button to display the action selections.
and
buttons to select the desired
value.
button to accept the highlighted selec-
tion and display the next option.
(Modulating Output or Relay)
buttons to high-
62-0255–05
Advertisement
