Klarstein MISTRAL Manual page 31

Wind mode:
Press this button to select between normal wind, natural wind and
sleep mode.
• Natural wind
preset programme. The fan speed is increased or slowed down
accordingly.
• Sleep mode
programme and is suitable for sleeping. The speed level is
automatically lowered.
Swing function:
• When the device is on, press this button to turn the swing function
on / off.
• Do not use force to turn the casing to change the direction of the
fan, as this may damage the unit.
Humidification / Ionisation:
When the unit is switched on and the humidification and ionisation
functions are deactivated, press this button to switch the two functions
on and off in the following order: Humidification function is switched on
 Ionisation function is switched on  Humidification and ionisation
function are switched on  Humidification and ionisation function are
switched off.
Low water level warning
• If there is not enough water in the submersible pump, it will stop for one
minute and the humidification indicator will flash.
• Fill the water tank with water (see section "Filling the water tank with water")
and restart the humidification function.
Automatic dimming of the screen brightness
If no button is pressed within 40 seconds, the screen dims. Press any button to
illuminate the screen.
Memory function
This unit has a memory function. If you put the unit into standby mode, the
previously set mode is saved and reactivated as soon as the unit is switched on
again.
Automatic standby mode
If the unit is in operating mode and you do not press any key within 15 hours, the
unit is put into standby mode.
: Natural wind is simulated according to the
: Air is emitted from the unit according to a preset
EN
31