Assembly And Installation [Specialist]; Installation And Commissioning Of The Heatbloc - PAW HeatBloC K33 Assembly, Installation And Operation Instructions

4 Assembly and installation [specialist]

The HeatBloC K33 can be mounted on a PAW modular distribution manifold or on a wall
®
bracket. The modular distribution manifold and the wall bracket are optional accessories
and are thus not included in the scope of delivery.
NOTICE
Damage to property!
The location of installation must be dry, load-carrying, frost-proof and protected
against ultraviolet radiation in order to prevent material damage of the installation.

4.1 Installation and commissioning of the HeatBloC

The HeatBloC can be installed
®
Option 1: on a PAW modular distribution manifold.
•
12
Consumer circuit
Return Flow
Flow
Return
Heat generator
9936073x-mub-en – V03
4 Assembly and installation [specialist]
®
2020/03