Table of Contents
Advertisement
Transport Belt Cleaning
1
2
3
QL-800 High Volume Maintenance Guide
Flip the transport over so the bottom of the transport is facing up.
Carefully remove the two cross-bars. These parts snap in and out of the feet and should be
removed with a straight up and down motion. If the cross-bar catches break, replace the
cross-bar (PN 42908240). See Figure 3.
Figure 3: Transport flipped over and cross-bars removed
Using the alcohol and lint-free cloth, clean the top and bottom surfaces of the belt by wiping
back and forth over the length of the belt.
Preventative Maintenance
7
Advertisement
Table of Contents
